There are many varieties of loose materials that are sold in cubic yards, or “yards,” for short. Topsoil, mulch, and gravel are simply a few of the generally used products that are sold by this volume metric.

You are watching: How many yards does a dump truck hold


It isn’t just landscapers and contractors who need to have actually knowledge that cubic yards. If you’re going to transport any of the products mentioned above in a dump truck, for example, it’s necessary to know precisely how much the truck have the right to carry. In the complying with guide, we’ll comment on how you recognize a intake truck’s volume in cubic yards.

Dump van Cubic Yardage - The Basics

While there is room because that variance, most full-size dump trucks have actually a volume of between 10 and 16 cubic yards. These types of vehicles frequently have their capacity noted in the owner’s manual.

Smaller intake trucks, frequently those mounted on a pickup frame, will have comparably much less capacity, occasionally as small as 1 ½ cubic yards.

If you can’t find your intake truck’s volume in the owner’s manual, don’t worry. It’s relatively simple to determine using a ice measure and a calculator.

Measure the width of the truck bed, native the inside of one wall surface to the other. Write down this number in feet to make the calculations simpler. For this reason let’s say her truck bed is 63 customs wide, you would certainly write it down as 5.25 feet.Measure the length that the bed in the exact same fashion and record the figure in feet.Measure the height that the bed, beginning from the bottom and extending to the height of the tailgate or the sides (whichever is lower).At this point, you should have three figures noted for the width, length, and also height of her bed. Multiply them every together to determine the capacity. For a van bed that’s 14 feet long, 6 feet wide, and also 5 feet high, you would certainly calculate 14 x 6 x 5 = 420. This number is the volume of your truck bed in cubic feet.There are 27 cubic feet in a cubic yard, therefore to discover your cubic yardage, you need to divide the previous number by 27. Making use of the example over for ours 420 cubic foot truck, we would calculate 420 ÷ 27 = 15.56 cubic yards.

Dump Truck capacity - more Than just Yardage

A cubic garden represents a block of material that steps three feet on every side. In theory, the material itself have the right to be anything, indigenous water to stone to mulch. For this reason, yardage alone is an imperfect measure up of a recording truck’s as whole capacity. Perhaps an ext important is the truck’s weight rating.

The weight rating will rely on a selection of factors, consisting of the truck’s chassis and also suspension. Smaller dump van on pickup frames can have a load limit as low as half a ton, whereas bigger dump van can carry as lot as 15 lots (30,000 pounds) that material. That’s quite the vast range!

When hauling many materials, the load of your fill will it is in the limiting factor. For example, sand have the right to weigh upwards the 3,000 pounds every cubic yard, meaning that in a massive, 30,000-pound intake truck, you could lug a best of 10 cubic yards. In a dump van on a half-ton pickup frame, you could only lug a third of a garden of sand.

Mulch, in particular, can be complicated to account for, largely because it relies on exactly how wet the is. Dried mulch can weigh as small as 700 pounds every yard, whereas wet, compost-like mulch can tip the scale at 1,500 pounds per yard.

See more: How Many Hours In A Mile S To Hours To Improve Fleet Management


Larger intake trucks deserve to carry around 10 to 16 cubic yards the material. However, the total volume is not usually the limiting factor. In most cases, the vehicle’s weight limit will certainly determine just how much product you are ultimately able to safely transport.