Draw weight is the crucial force, in pounds, necessary to carry the link bow to full draw. Shooting the appropriate poundage is really important therefore that compelled kinetic power needed is met there is no sacrificing suitable shooting form.

You are watching: How to adjust draw weight on a compound bow


Before adjusting her poundage, the limbs might be “locked” into their current position through locking bolts. These would be located just below the height limb or over the bottom limb and are screwed right into the riser. To change the limb bolts, these bolts have to be loosened first. ~ adjustment, they can then as soon as again be tightened.

To adjust the attract weight, we have to unload or load more stress and anxiety (flex) ~ above the limbs; we do that by tightening or loosening the body bolts.

To raise draw weight to maximum poundage, tighten the limb bolts (clockwise) till both limbs are tight versus the riser.


To lower the attract weight we unscrew the limb bolts equally on each limb (counterclockwise).

Safety Precaution: Be careful that you perform not unscrew the body bolts passed the bow’s lowest load setting. If the body bolts are unscrewed too much, the limb bolt’s threads deserve to come out of the riser and cause damages to the bow and injure the mechanic.

Every bow’s limbs have actually a certain draw weight rating: 50-60, 60-70, 70-80, etc. To check to check out if a bow is in “spec” (at its specified manufacturer’s measurements) tighten (clockwise) the limb bolts till the limbs are versus the riser. The bow will now be at the maximum poundage and maximum attract weight, ATA measurement, and brace elevation measurement have the right to be verified.

To raise attract weight

Tighten the body bolts until the limbs space tight to the riser.

*

To lower draw weight

First, raise the illustration weight come its max. Next, unscrew both limb bolts one transformation (360°) and check the poundage on a bow scale. Repeat this process until you reach your desired draw weight. Just attempt to shoot attract weights in the limb’s specified range (50-60 lbs, 60-70 lbs). If they space not marked, max out the draw weight and also your lowest draw weight will be 10 lbs lighter in most cases. Once using a bow scale, hook the string to the scale’s hook at the nocking point and pull down on her bow’s riser until your bow is in ~ it’s “roll over” point out on the cams and also look at the scale for its attract weight. Try not to roll the cam(s) over, however if you do, make sure you save a great grip as soon as raising the bow ago up to take it off the scale… it’ll try to take it you for a ride!

*

How To discover Your Ideal draw Weight

To discover your right poundage, sit down on a chair or tailgate of a truck and pull your bow earlier with your feet turn off the ground. If you are comfortable with the poundage and can hold full draw comfortably, the poundage is wherein you need it. If the poundage seems high (it was hard to pull earlier and hold) reduced the draw weight in 2 lb increments till you have discovered a comfortable attract weight.

See more: A Short Analysis Of The ‘ Lucy Locket Lost Her Pocket Meaning

Average attract weights

Smaller kids (45-65 lbs) = 10-20lbsChildren (65-95 lbs) = 20-35lbsWomen and boys (95-125 lbs) = 35-45 lbsLarger women and boys (125-145 lbs) = 45-55 lbsMen (145-175 lbs) = 55-65 lbsMuscular men = 60-70 lbsMuscular barbarians = 70-100 lbs

Although this are median drawing weights, the is crucial to shoot what is comfortable for you. Any attempt to draw an ext weight 보다 you must will an outcome in wrong archery form and influence accuracy.